Why does my Cable Modem have to be rebooted
so often?
One possible
explanation is signal loose. When a
cable wire is split using a splitter its
signal strength is cut in half. If you
cable line comes into your house and
then goes through a splitter, you just
cut your signal power by 50%. Then ones
of those lines runs up to a room that
has a TV and your cable modem and your
have another splitter, you just cut that
signal by another 50%.
Solution: You need
to have a cable run from the entre-point
into your house directly to your cable
modem so that there is only one split.
This will maximize the signal strength
going to your modem. Unlike your TV
which gives a picture even when the line
is split several times, this is not the
case with a cable modem.
SOLUTION:
Click HERE to contact Computer Solutions |
